|
|
|
|
IMTS Attendees Get First Look at Mastercam X5
Press Release Issued by Mastercam
Mastercam X5 introduces significant new capabilities, including new dynamic milling techniques, multiaxis machining, Smart Hybrid Finishing and more. |
|
|
VISTAGY Partners with NS Solutions
Press Release Issued by VISTAGY, Inc.
Partnership provides VISTAGY with access to key industries while enabling NS Solutions to leverage FiberSIM in the composites space. |
|
|
eCatalog Conference 2010
Press Release Issued By TraceParts
In 2010 TraceParts together with its partners KiM, crossbase and Plan Software, has once again staged the eCatalog Conference in St. Wendel, Germany. |
|
|
Kaman Selects VISTAGY's FiberSIM
Press Release Issued By VISTAGY
VISTAGY announced that Kaman Helicopters has entered into an agreement to license FiberSIMŽ. composites engineering software. |
|
|
CADverter for 3DVIA Composer Now Available
Press Release Issued by Theorem Solutions
Interactive 3DVIA Composer users can now simply open JT data, including geometry, assemblies, product structure, meta data and PMI. |
|
|
VISTAGY Partners with NIAR
Press Release Issued by VISTAGY
National Institute for Aviation Research at Wichita State uses VISTAGY’s FiberSIM® software to conduct composites material research. |
|
|
Russian Shipbuilder Chooses FiberSIM
Press Release Issued by VISTAGY
VISTAGY’s status in composites engineering and top notch professional services are key factors in firm’s decision to purchase FiberSIM. |
|
|
XVL Studio Version 9.0 Released
Press Release Issued by Lattice Technology
XVL Studio delivers tools that enable advanced, accurate and rapid design review, motion simulation, kinematics, process design, and reporting. |
|
|
ANSYS Releases Ansoft Designer
Press Release Issued by ANSYS
A high-performance computing (HPC) capability has been added that allows engineers to analyze process variations. |
|
|
New Webinar Sponsored by Sigmetrix
Announcement by ConnectPress and Sigmetrix
This technical presentation will demonstrate the successful application of simulation techniques in the Chrysler PowerTrain division. |
|
|
FLUENT for CATIA V5 5.0 Released
Announcement by ANSYS
FLUENT is a rapid flow modeling tool fully embedded into Dassault Systeme’s Product Lifecycle Management (PLM). |
|
|
ANSYS Named To Software Top 100
Press Release Issued by ANSYS
ANSYS is named to the Software Top 100™, the leading and independent online overview of the world’s largest software companies. |
|
|
Bombardier Aerospace Standardizes on VISTAGY
Press Release Issued by VISTAGY
Bombardier relies on FiberSIM to meet deadlines for the delivery of the new CSeries commercial aircraft and the all-composite Learjet 85 business jet |
|
|
ANSYS Sponsors Astrobotic Technology
Press Release Issued by ANSYS
Through the use of tools from ANSYS, Astrobotic Technology is simulating machinery and materials performance under extreme lunar conditions. |
|
|
Right Hemisphere Selects Right Connect
Press Release Issued by Right Hemisphere
Right Connect will recruit new computer-aided design (CAD) software resellers in the Asia-Pacific region in addition to managing resellers. |
|
|
Forming Technologies Celebrates 20th Anniversary
Press Release Issued by Forming Technologies Inc.
Since 1989, FTI has provided OEMs and suppliers in the automotive, aerospace, and appliance industries with innovative software and training solutions. |
|
|
New Mastercam X4Toolpath Refinement
Press Release Issued by Mastercam
Introducing 3D surface toolpath refinement, a new technique that delivers a much finer finish on complex parts. |
|
|
Delcam to Launch PowerSHAPE CAD
Press Release Issued by Delcam Inc.
This new version will be the most significant development in Delcam’s design software since it was first released some ten years ago. |
|
|
DCS Announces the Release of 3DCS
Press Release Issued by DCS
3DCS Analyst Stand Alone version 7.0.0.0 for Multi CAD on both Windows XP 32-bit and 64-bit platforms is now available. |
|
|
Mastercam X4 Wire Released
Press Release Issued by CNC Software
Mastercam Wire has been designed to reduce programmer interaction and increase machining flexibility. |
|
|
Right Hemisphere Wins Top Honors Award
Press Release Issued by Right Hemisphere
The company won the 2009 Excellence in Enterprise Integration Award from the Association for Enterprise Information (AFEI). |
|
|
mental images Unveils iray Rendering Solution
Press Release Issued by mental images
mental images introduces iray® - a fully GPU accelerated, turn-key rendering solution for a wide range of 3D graphics application developers. |
|
|
ANSYS Announces HPC Products
Press Release Issued by ANSYS
ANSYS HPC is a solution set for customers to obtain enhanced insight and productivity through expanded use of high-performance computing (HPC). |
|
|
ANSYS Releases HFSS 12.0
Press Release Issued by ANSYS
Software simulates and validates the behavior of complex high-performance radio frequency (RF), microwave and millimeter-wave devices. |
|
|
Dynamic Machining in Mastercam X4
Press Release Issued by CNC Software
Mastercam X4, offers expanded machining flexibility, an increase in speed and automation and a suite of new toolpaths. |
|
|
XVL Web Master Version 8.1 Released
Press Release Issued by Lattice Technology
XVL Web Master takes 3D design data and publishes it into HTML format for immediate use on an internet or intranet. |
|
|
ANSYS Ranked #33 on Fast List
Press Release Issued by ANSYS
ANSYS is ranked number 33 overall, the only engineering simulation provider and the only Pennsylvania-based company to make the list. |
|
|
Improvements In Cement Manufacturing
Press Release Issued by ANSYS
ANSYS software helps aixprocess explore process improvements that will make cement manufacturing more profitable and more environmentally responsible. |
|
|
OPTIS Reinforces Its Position in Asia
Press Release Issued by OPTIS
This new facility will deliver expert technical and sales support and a wide range of training courses for Chinese customers. |
|
|
Procter & Gamble Selects SimManager and SimXpert
Press Release Issued by MSC.Software
P&G’s objective is to minimize the time required to perform advanced simulations and improve the reliability of virtual prototypes and manufacturing simulations. |
|
|
Right Hemisphere Unveils Deep Exploration 6
Press Release Issued by Right Hemisphere
Deep Exploration 6 has evolved to become highly integrated into Right Hemisphere’s visual solutions and supporting technology infrastructure. |
|
|
CNC Software Unveils Mastercam X4
Press Release Issued by CNC Software
Mastercam X4 offers expanded machining flexibility and an increased emphasis on speed and automation. |
|
|
MSC Conference Presentations Now Available
Press Release Issued by MSC Software
The technical presentations from the educational track of MSC’s Virtual Product Development conference are now available for download. |
|
|
RAND Worldwide Launches FT&A Extraction
Press Release Issued by RAND Worldwide
FT&A Extraction and First Article Inspection Utility was created to make the design to manufacturing process more efficient. |
|
|
ATI FirePro V7750 From AMD
Press Release Issued by AMD
AMD has announced the availability of the ATI FirePro™ V7750 graphics accelerator for the high-end market. |
|
|
VISTAGY to Exhibit at JEC Composites Show
Press Release Issued by VISTAGY
The company will share how they are partnering with industry leaders to
offer state-of-the-art technology for composites analysis and more. |
|
|
LEDAS Releases New Plug-in
Press Release Issued by LEDAS Ltd.
EDAS released version 1.0 of its Driving Dimensions plug-in for Google
SketchUp, a free 3D modeling software application. |
|
|
Release 2.2 of LGS 2D Geometric Solver
Press Release Issued by LEDAS Ltd.
Variational geometric solver LGS 2D is used by CAD/CAM/CAE software development companies to implement parametric capabilities. |
|
|
NVIDIA Transforms High-End Visualizations
Press Release Issued by NVIDIA
Added graphics memory, high color fidelity and next-generation GPU architecture enables ultra-fast application for MCAD, DCC and broadcast pros. |
|
|
CAMWorks Wins Readers’ Choice Awards 2008
Press Release Issued by Geometric Technologies
Geometric Tehnologies' CAMWorks software receives Modern Application News’ (MAN) Readers’ Choice Award 2008 in the CAD/CAM category. |
|
|
Geometric to Showcase at Wonderworld 2008
Press Release Issued by Geometric Ltd.
Geometric Limited will exhibit various innovative solutions aimed at driving operational excellence for process industries at Wonderworld 2008. |
|
|
Swimming from Europe to Africa
Press Release Issued by TraceParts
TraceParts employee faced an extreme challenge by swimming about 20 km of open sea, where European and African continents separate. |
|
|
RAND Updates CATIA V5 R18 Courses
Press Release Issued by RAND Worldwide
RAND Worldwide announced CATIA V5 R18 as the standard version for all its public CATIA V5 training classes. |
|
|
NVIDIA Is First To Ship OpenGL 3.0
Press Release Issued by NVIDIA
Just two days after the Khronos Group announced the new OpenGL 3.0 standard, NVIDIA Corporation released beta drivers for the cross-platform. |
|
|
New! ALGOR V22
Press Release Issued by ALGOR
ALGOR announced that ALGOR V22 significantly upgrades all areas of FEA – modeling, simulation and results evaluation and presentation. |
|
|
Three Ways to Develop Your Proficiency
Press Release Issued by Maverick Solutions
Effective as of July 18, 2008 Maverick Solutions introduces three ways to get your companies CAD skills up to speed. |
|
|
Expanded Program Training
Press Release Issued by Maverick Solutions
Maverick Solutions Inc. expands training into multiple cities across North America. |
|
|
Geometric Releases GeomCaliper Version 2.2
Press Release Issued by Geometric Ltd.
Geometric Limited, announced the release of 2.2 version of ‘GeomCaliper for CATIA V5’ and ‘GeomCaliper for Pro/ENGINEER’ products. |
|
|
Anark Approved as AGI Affiliated Product Partner
By Anark Corporation
Anark and Analytical Graphics announced that Anark has been approved as an AGI Affiliated Product Partner due to the complementary nature of the companies’ products and solutions. |
|
|
MFG.com and TraceParts Join Forces
By MFG.com
MFG.com chose TraceParts to launch its Partnership Program and to come along with the development of its service for European engineers. |
|
|
Briefing from Wohlers Associates
By Wohlers Associates
The market for additive fabrication (AF), consisting of all products and
services globally, grew 16% to an estimated $1.141 billion in 2007. |
|
|
Adobe Expands LiveCycle Enterprise Suite
By Adobe Systems Incorporated
Adobe Systems Incorporated announced Adobe LiveCycle Enterprise Suite (ES) Update 1, a significant enhancement to the LiveCycle ES technology platform that helps businesses and governments more effectively engage. |
|
|
Peter Robison, to Keynote at PLM Road Map 2008
By Collaborative Product Development Associates
CPDA announces that Peter Robison, will join GM’s Terry Kline, Lockheed Martin’s Christopher L. Blake, Siemens PLM Software’s Stephen Bashada, and HP’s Christian Verstraete as a keynote speaker at its annual PLM Road Map conference. |
|
|
Four-Fold Increase in Educational Sites Using Flomerics
By Flomerics
Since Flomerics announced its EFD for Education Initiative a year ago there has been a four-fold increase in the number of sites using its popular Engineering Fluid Dynamics (EFD) software for teaching and research purposes. |
|
|
PLMjobs.com Announces Launch
By Nooey Ltd.
Nooey Ltd has announced the launch of PLMjobs.com, the niche job board catering exclusively for the Product Lifecycle Management (PLM) industry. |
|
|
Altair Releases HyperWorks 9.0 for CAE
By Altair Engineering
Altair Engineering announced the release of Altair HyperWorks 9.0, the next generation of its popular integrated suite of computer-aided engineering (CAE) software applications. |
|
|
Dassault Releases Abaqus 6.8 for FEA
By Dassault Systèmes
Dassault Systemes announced the availability of Abaqus 6.8, its technology-leading unified finite element analysis (FEA) software suite from SIMULIA. |
|
|
Datakit Rises to the Challenge of FDT and PMI
By Datakit
Francis Cadin, CEO of Datakit, attended the 3D Collaboration & Interoperability Conference, where the integration of PMI and other related information with 3D CAD models was one of the main issues on the agenda. |
|
|
Largest Global Installation of MSC.Software's SimManager
By MSC.Software
MSC.Software announced that the automotive manufacturer AUDI AG has further extended their existing simulation management environment, going into full-scale production with MSC.Software's SimManager Enterprise offering. |
|
|
CGTech Software Wins Best Software Award
By CGTech
CGTech is proud to announce that it's VERICUT 6 CNC Simulation and verification Software won the Best Software award in the UK Machine Tool industries prestigious Metalworking Production Awards. |
|
|
Learn Optical Alignment One Week at a Time for a Year
By Optical Short Course International, Inc.
Discover how to learn optical alignment one week at a time for 52-weeks with the new optical alignment training course available from Optical Short Course International. |
|
|
Theorem Solutions Showcases New Products at COE 2008
By Theorem Solutions
A series of innovative interoperability products will be highlighted by product data exchange specialist Theorem Solutions at the CATIA Operators Exchange Annual PLM Conference & TechniFair. |
|
|
Reduce Part Set-up Time with Edgecam 12.5
By Planit Software
Planit introduces a new module to Edgecam – its market leading off-line NC programming software – that allows automation of the part set-up process by working in conjunction with Renishaw probing systems. |
|
|
GEOMATE Ships GrafiCalc 2009 for Calculations
By GEOMATE Company
GEOMATE Company has released GrafiCalc 2009 software that enables users to simulate and solve a wide range of design and engineering challenges while making informed decisions. |
|
|
CGTech to Demonstrate Developments at COE
By CGTech
CGTech will be presenting the latest developments in composite fiber placement programming & simulation at the COE 2008 Annual PLM Conference & TechniFair. |
|
|
IBM Completes Acquisition of Telelogic AB
By IBM
IBM announced the completion of its approximately $845 million USD (approximately 5 billion Swedish Kronor) tender offer for the shares of Telelogic AB (Nordic Exchange/MidCap/TLOG). |
|
|
Flomerics Renews as a ConnectPress Gold Sponsor
By Flomerics
Flomerics has renewed their agreement for the ConnectPress CATIA, Pro/Engineer and Green Building communities and has also added the Inventor community this year as gold sponsors. |
|
|
HP's Christian Verstraete to Join Keynote Speaker Line-up
By Collaborative Product Development Associates
CPDA is pleased to announce that Christian Weierstrass will join Lockheed Martin's Christopher L. Blake, and Siemens PLM Software's Stephen Bashada, as a keynote speaker at its annual PLM Road Map conference. |
|
|
Science + Computing AG Joins Altair
By Altair Engineering
Altair announced that Germany-based IT service provider, science + computing ag (s+c), has joined the company's Implementation Partner Program. |
|
|
CPDA Announces PLM Road Map 2008
By Collaborative Product Development Associates
CPDA announced that its conference PLM Road Map 2008 will take place on September 23 – 24, 2008. |
|
|
ConnectPress and GEOMATE Team up
Compiled by Amber Dunning, ConnectPress Media Coordinator
ConnectPress and GEOMATE are pleased to announce an exclusive offer for community members only. |
|
|
COFES Engineering Technology Conference Eyes Sustainability
By Cyon Research Corporation
Cyon Research Corporation, the host of COFES: the Congress on the Future of Engineering Software, has announced that it has partnered with TerraPass to balance out the carbon dioxide emissions of attendees’ travel to and from this year’s event. |
|
|
In-Depth Research on Design & Computing Technologies
Compiled By Amber Dunning, ConnectPress Media Coordinator
A familiar name in providing in-depth, objective information for assessing technology and business objectives in PLM, Collaborative Product Development Associates (CPDA) is making a selection of its publications available for the first time through ConnectPress. |
|
|
ConnectPress Teams with Wohlers Associates
Compiled By Amber Dunning, ConnectPress Media Coordinator
NEW at ConnectPress — Wohlers Report 2007 provides an in-depth study on the advances in 3D printing, additive fabrication, and rapid manufacturing. |
|
|
Fairfield University to use Dassault DELMIA
By Dassault Systèmes
Dassault Systèmes announced that its academic partnership with Fairfield University School of Engineering (Connecticut) has been expanded to include DELMIA Automation. |
|
|
Thales Implements Dassault Systemes' 3DVIA Composer
By Dassault Systèmes
Dassault Systemes announced that Thales Alenia Space is studying the implementation of an advanced system combining Dassault Systemes' 3DVIA Composer with the 2007 Microsoft Office system and Microsoft Office SharePoint Server 2007. |
|
|
CPDA Joins ConnectPress as a Silver Community Sponsor
Compiled By Amber Dunning, ConnectPress Media Coordinator
Collaborative Product Development Associates has joined ConnectPress as a Silver Sponsor in the Technology Communities for CATIA, Inventor, MicroStation, Pro/E, Solid Edge, SolidWorks and UGS. |
|
|
RAND Schedules Enhancing Your CATIA V5 Productivity Event
By RAND Worldwide
RAND Worldwide announced that its Professional Services group has scheduled Enhancing your CATIA V5 Productivity, a Web seminar highlighting the steps required by every organization to achieve better CATIA V5 efficiency and productivity. |
|
|
CPDA Announces Keynote Speakers for PLM Road Map 2008
By Collaborative Product Development Associates
CPDA announces that Christopher L. Blakeand Deputy to the Vice President of Enterprise Process Integration, Lockheed Martin Aeronautics Company and Stephen M. Bashada, will make keynote presentations at its annual PLM Road Map conference. |
|
|
VISTAGY Renews Status as Supplier to ING Renault F1Team
By VISTAGY Inc.
VISTAGY announced that it has renewed its status as an official supplier of specialized software to ING Renault F1 Team, and joined team officials in Paris, France for the exciting launch of the brand new R28 racing car for the 2008 Formula One season. |
|
|
Flomerics Celebrates 20th Anniversary
By Flomerics
Flomerics celebrates its 20th anniversary as an independent company this year, placing it firmly into a rare and elite group of companies that have prospered for such a long period. |
|
|
GEOMATE Ships GrafiCalc Expert 2008 for Digital Prototyping
By GEOMATE
GEOMATE Company releases GrafiCalc Expert 2008 digital prototyping software that combines the disciplines of sketching, calculations, motion simulation, tolerance analysis, and back solving in a single CAD-neutral application. |
|
|
Flomerics Joins NAFEMS CFD Working Group
By Flomerics
To help promote best practice in the use of Computational Fluid Dynamics (CFD) during the design phase, Flomerics has joined the NAFEMS CFD Working Group. |
|
|
Altair Engineering and Phoenix Integration Collaborate
By Altair Engineering
In response to customer requests, Altair Engineering and Phoenix Integration have developed a unified software solution for aerospace and defense organizations using computer-aided engineering (CAE) software for product design. |
|
|
ALGOR V21 Upgrades Entire Spectrum of FEA
By ALGOR
ALGOR announced that its latest, major finite element analysis (FEA) software release, ALGOR V21, significantly upgrades the entire spectrum of FEA: modeling, solution and results evaluation and presentation. |
|
|
DTE, XF1tech to Offer CATIA V5 Based F1 Design
By Desktop Engineering
Desktop Engineering is working in conjunction with a new design consultancy to offer CATIA V5 based Formula 1 design technology and manufacturing expertise to any design project. |
|
|
TechniGraphics Adds 40 People
By TechniGraphics
TechniGraphics, Inc., recently opened two CAD data migration centers with emphasis on the conversion of 2D drawings and CATIA V4 parts to CATIA V5. |
|
|
Pelamis Wave Power Delivers Ocean Energy Generators
By Dassault Systèmes
Dassault Systèmes announced that Pelamis Wave Power is performing rapid design evaluation and optimization of its power generators with Abaqus Unified Finite Element Analysis (FEA) software from SIMULIA. |
|
|
LEDAS Delivers ENOVIA SmarTeam in Russian for Dassault
By LEDAS Ltd.
LEDAS announced that its partnership with Dassault Systèmes Russia Corp. and ENOVIA Corp. enabled Dassault Systèmes (DS) to fully localize ENOVIA SmarTeam product data management (PDM) solutions to Russian on time with outstanding end-quality. |
|
|
Theorem's Latest Translators Keep Pace with CATIA V5
By Theorem Solutions
Theorem Solutions continues to keep abreast of latest market requirements with the upgrading of its CADverter product suite to provide bi-directional translation between CATIA V5's newly-introduced Revision 18 and other popular CAD and visualisation systems. |
|
|
FTI Releases CATIA ProgNest R18 CAA V5
By Forming Technologies Inc.
Forming Technologies announced at the COE 2007 Automotive Industry Workshop, the global release of CATIA ProgNest R18 CAA V5 based. |
|
|
FTI Offers CAA Applications Suite for CATIA V5 R18
By Forming Technologies Inc.
Forming Technologies announced at the COE 2007 Automotive Industry Workshop, the global availability of their entire suite of CAA based applications for Release 18 of CATIA V5. |
|
|
KTM's Superbike Gets Ready for the Street with Dassault
By Dassault Systèmes
Dassault Systèmes announced that KTM Sportmotorcycle AG is improving the evaluation of product performance and reliability through the use of Abaqus Unified Finite Element Analysis (FEA) software from SIMULIA. |
|
|
Megayacht Designer Implements CATIA
By Dassault Systèmes
Dassault Systemes announced that Arthur M. Barbeito & Associates, Inc. has chosen DS's CATIA design authoring software as its primary design platform. |
|
|
Learn About Streamlining the Process From 3D CAD to CAE
By CD-adapco
CD-adapco would like to invite you to a seminar on how, by using fast and automatic surface wrapping technology, you can significantly reduce the tedious and time-consuming work involved in preparing CAD for simulation. |
|
|
Kubotek USA Announces New Reseller
By Kubotek USA
Kubotek USA announced the addition of a new Reseller in the Southwestern US and Mexico Integrated Manufacturing Technology – (IMT) a multinational VAR based in the Southwest United States. |
|
|
Theorem Breaks New Ground with CADverter for IsoDraw
By Theorem Solutions
A new family of CADverters from data translation specialist, Theorem Solutions promises improved interfacing of IsoDraw with CATIA and UG NX, as well as major benefits for technical publications professionals. |
|
|
Glass Service Improve BV Reduces Time and Cost
By Dassault Systèmes
Dassault Systèmes announced that Glass Service Improve BV is using professional services and Abaqus Unified Finite Element Analysis (FEA) software from SIMULIA to accelerate and optimize the development process of non-round glass bottle forming. |
|
|
Streamline Your Process
By CD-adapco
CD-adapco would like to invite you to a seminar on how, by using fast and automatic surface wrapping technology, you can significantly reduce the tedious and time-consuming work involved in preparing CAD for simulation. |
|
|
TechniGraphics Expands European PLM Business
By TechniGraphics
TechniGraphics, a leader in PLM and Engineering Services announced that it has purchased the PLM business assets of CUTit Systemes and Engineering located in Steinebach, Germany. |
|
|
EDS Technologies Partners with Virtools
By EDS Technologies
EDS Technologies announced that it has partnered with Virtools, a Dassault Systemes company, to enhance its PLM portfolio to address the Virtual Reality market. |
|
|
Schefenacker USA Delivers Faster and Enhances Quality
By Dassault Systemes
Dassault Systemes has announced that Schefenacker Vision Systems USA has achieved significant benefits through the implementation of CATIA and ENOVIA SmarTeam solutions at its Marysville, Mich. facility. |
|
|
FTI Continues Growth Expansion in China
By Forming Technologies Inc.
Forming Technologies announced an agreement designed to enable MTECH to be a Preferred partner of FTI’s CATIA based software and further strengthening its local support in China. |
|
|
JP Kenny Simulates Realistic Performance of Pipelines
By Dassault Systèmes
Dassault Systèmes announced that JP Kenny, one of the world's largest independent pipeline and subsea engineering organizations, has adopted Abaqus Unified Finite Element Analysis (FEA) software, from Dassault Systèmes’ SIMULIA brand. |
|
|
Bull Selects Altair Engineering’s PBS Professional
By Altair Engineering
Altair Engineering announced that it has integrated PBS Professional with Bull's NovaScale high-performance computing (HPC) systems to provide customers with a pure on-demand computing software environment. |
|
|
VISTAGY Announces Seat Design Environment 2.0 Software
By Vistagy Inc.
VISTAGY announced Seat Design Environment (SDE) 2.0, the latest version of its proven 3D development environment that is tailored specifically to the design and manufacture of seats for the transportation interiors industry. |
|
|
ITI TranscenData launches CADIQ 5.0
By ITI TranscenData
ITI TranscenData has launched CADIQ 5.0, the latest version of its advanced 3D model comparison and product data quality tool. |
|
|
Flomerics Flotherm v7
Press Release By Flomerics
Flomerics has released Version 7 of its Flotherm electronics thermal analysis software. |
|
|
Harvest Technologies Adds DuraForm EX
Press Release Submitted By Harvest Technologies
Harvest Technologies announced the addition of DuraForm EX to its SLS rapid prototyping and manufacturing material offerings. |
|
|
Airbus Selects Dassault Systèmes’ SIMULIA
Press Release Submitted By The Parker Group (for Abaqus from SIMULIA)
Dassault Systèmes announced that Airbus has adopted the Abaqus Finite Element Analysis (FEA) software from SIMULIA. |
|
|
GEOMATE Becomes a Gold Level ConnectPress Sponsor
By Amber Dunning, ConnectPress Media Coordinator
GEOMATE and ConnectPress are pleased to announce that GEOMATE a leading developer in engineering decision-support software solutions has become a Gold level sponsor for ConnectPress’ CATIA, Inventor, Solid Edge, SolidWorks, Pro/E, and UGS Communities. |
|
|
FKI Logistex Continues Steady Investment in US
Press Release Submitted By FKI Logistex
FKI Logistex announces that its continuing strategy of investing in its US-based operations is a good example of successful foreign investment in North American manufacturing, engineering, and product development. |
|
|
Handbook for Managers Moving from 2D to 3D CAD
A practical guide written for CAD and engineering managers and professionals in the design and manufacturing industry that are interested in adopting 3D, Moving from 2D to 3D CAD For Engineering Design: Challenges and Opportunities by Louis Gary Lamit makes a strong case in favor of change. |
|
|
IGE+XAO Offers 'SEE Electrical Harness PLM for CATIA'
The IGE+XAO Group launches the first version of a software package, totally integrated to Dassault Systèmes CATIA and covering the complete electrical harnesses design process for the aircraft and automotive markets. |
|
|
iSEEK Delivers CADSEEK Polaris
CADSEEK Polaris, iSEEK Corporation's latest release, enhances the core shape algorithms for greater accuracy and speed, and extends the technology to hunt down similar individual parts from an assembly. |
|
|
SprutCAM 2007 Launched
SprutCAM has continued its policy of offering powerful CAM software at a realistic price with the launch of SprutCAM 2007. |
|
|
Geometric Software Releases GeomCaliper Version 2.0
Geometric Software Solutions (Geometric), a leader in product lifecycle management (PLM) services and technologies and a Dassault Systèmes CAA V5 Gold Partner, announced the release of GeomCaliper TM version 2.0 for CATIA V5. |
|
|
ALGOR Releases PipePak V10
ALGOR, Inc., a leading provider of design, analysis and simulation software, announced that the latest release of its piping design and analysis software, PipePak V10, features bi-directional associativity between its spreadsheet and graphical display window including immediate display of pipes entered via the spreadsheet. |
|
|
Mora of Sweden to Optimize Product Value
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced that Mora of Sweden, a global manufacturer leader in premium quality cutting tools, has selected DS’s ENOVIA SmarTeam and its quick-start SmarTeam Design Express package to launch and implement its new PLM business strategy, ultimately shortening product lifecycles and reducing time-to-market. |
|
|
Processia to Sell Dassault CATIA, ENOVIA, DELMIA
Processia Solutions and Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced that the longtime Canadian services partner has become a certified reseller of CATIA, ENOVIA and DELMIA software solutions. |
|
|
Océ Announces New Productivity Enhancements
Océ, a global leader in digital document management and deliver systems, announced the immediate availability of an upgrade to its Océ Repro Desk Server software. Customers operating on Océ Repro Desk Server 1.X and Océ Repro Desk 4.X platforms can now upgrade to Océ Repro Desk Server 1.6.5. |
|
|
FARO Releases Scene v4.1 Laser Scanner
FARO Technologies, Inc., the world market leader in portable computer-aided measurement arm and laser tracker sales, announced that it released FARO Scene v4.1. |
|
|
Belfast's PreMade Project to Use DELMIA
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced that DELMIA digital manufacturing solutions will be playing an important part in the PreMade Project, which is utilizing and developing advanced lean and cost modeling capabilities within digital manufacturing software. |
|
|
Chengdu Aircraft and Dassault Systemes Take to the Skies wit
Dassault Systemes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced that Chengdu Aircraft Industrial Group, a major Chinese supplier for the global aviation industry, is using DS's CATIA Composites Design to develop aircraft parts. |
|
|
Tech Profile: Adobe Photoshop CS3 Extended
John Myers, ConnectPress Staff
A profile of the upcoming Photoshop CS3 Extended, CS3 Extended will include a number of features targeted toward the AEC and MCAD communities. |
|
|
Mora of Sweden Selects ENOVIA SmarTeam, Design Express
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced that Mora of Sweden, a global manufacturer leader in premium quality cutting tools, has selected DS’s ENOVIA SmarTeam and its quick-start SmarTeam Design Express package to launch and implement its new PLM business strategy, ultimately shortening product lifecycles and reducing time-to-market. |
|
|
Larsen & Toubro to Deploy CATIA, ENOVIA VPLM, MatrixOne
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced it has secured a major order from Larsen & Toubro Limited. The technology-driven engineering and construction giant will adopt cutting edge integrated PLM solutions from DS for its heavy engineering division. |
|
|
ANSYS Version 11.0
By John Myers, ConnectPress Staff Writer
A profile of latest version of ANSYS' flagship software. |
|
|
Kimberly-Clark Corporation Standardizes on SimEnterprise
MSC.Software Corp., the leading global provider of enterprise simulation solutions including simulation software and services, announced that Kimberly-Clark Corporation, a leading health and hygiene company, has selected MSC.Software's SimEnterprise, specifically SimManager, as the standard environment for modeling and simulation in product and process design. |
|
|
NextComputing Offers NVIDIA Quadro FX 4600 by PNY
NextComputing announces the addition of NVIDIA Quadro FX 4600 by PNY Technologies to its NextDimension family of flextop personal supercomputers. NextComputing's NextDimension family is the only line of portable graphics workstations on the market that can accommodate ultra high-end graphics boards of this caliber. |
|
|
RAND and Forming Technologies Announce Partnership
RAND North America, a joint venture of Dassault Systèmes and RAND Worldwide (TSX: RND), and Forming Technologies Inc. (FTI), the world's leading provider of software solutions for the design, feasibility, and costing of sheet metal components, announced that RAND North America, will act as FTI's newest CATIA solution distribution partner. |
|
|
SpaceClaim Launches 3D Mechanical Design Technology
SpaceClaim Corporation announced the launch of its flagship product, SpaceClaim Professional 2007. Recognizing that the benefits of 3D mechanical design remain out of reach for most who contribute directly to product development, SpaceClaim Corp. makes 3D modeling accessible through a highly flexible design environment coupled with a modern user experience. |
|
|
ANSYS Releases Icemax v3.0 for IC Package Design
ANSYS, Inc., a global innovator of simulation software and technologies designed to optimize product development processes, announced the release of version 3.0 of its ANSYS Icemax software for circuit extraction of advanced integrated circuit (IC) package designs. |
|
|
Alibre and FreeDesign Offer Form-and-Function Bundle
Alibre, Inc., and FreeDesign, Inc, jointly announced the bundle release of Alibre Design Expert and FreeDimension. The double software package combines Alibre's most advanced parametric solid modeler with FreeDesign's revolutionary new method for 3D surface creation. |
|
|
Z Corporation Unveils 3D Color Printer
Z Corporation took another giant step in its mission to make high-definition color 3D printing available to the masses with the release of the ZPrinter 450. The new machine is the first color 3D printer to break the $40,000 price point, the most highly automated, and the most compatible with contemporary office environments. |
|
|
TUKATECH Releases TUKAcad 2007-Windows VISTA
TUKATECH is pleased to announce the release of TUKAcad 2007-Vista version. The new Windows Vista operating system provides speed, security, flexibility, multi-screen, multi-tasking functionality. |
|
|
Flomerics Ships Flopack v6.2
Flomerics has further enhanced the productivity of Thermal Design Engineers with the launch of Flopack V6.2 - the latest version of its web-based SmartPart library that generates fast, accurate thermal models for IC packages and associated parts. |
|
|
ESI Group's PAM-QUIKFORM for CATIA V5 Now Available
ESI Group is pleased to announce that PAM-QUIKFORM for CATIA V5, developed under the CAA V5 Gold Software Partnership Agreement signed with Dassault Systèmes, a world leader in 3-D and Product Lifecycle Management (PLM) solutions, is now available. |
|
|
Theorem CADverters Compatible with CATIA V5 R17
CAD data exchange specialist Theorem Solutions continues to keep pace with Dassault Systemes' latest CATIA V5 releases, with strong sales of its CADverters compatible with CATIA V5 release 17 and earlier. |
|
|
Adobe to Release PDF Specification
Adobe Systems announced that it intends to release the full PDF (portable document format) v1.7 specification to AIIM, the Enterprise Content Management Association, for the purpose of publication by the ISO (International Organization for Standardization). |
|
|
Datakit Integrates CATIA V4, V5 Converters
Datakit, a Cad Data Exchange leading company and VB2S, a software publisher specialized in real-time 3D technologies, announced that the integration of Datakit’s native CATIA V4 and V5 converters, consolidate the positioning of Subdo for the creation of 3D presentations for the industrial market. |
|
|
Icona Releases Aesthetica/CATIA V5 Interface Module
Icona Solutions Ltd., developers of aesthetica, the unique CAE software product for interactively visualizing the impact of manufacturing variation on the aesthetic quality of product assemblies, has announced the availability of a new aesthetica/CATIA V5 Interface Module. |
|
|
IMS Releases IMSce for CATIA V5
IMS Software, the pioneering developer of advanced NC postprocessing, verification and simulation solutions has announced the immediate availability of IMSce for V5, providing CNC controller emulation functionality within the CATIA V5 manufacturing environment. |
|
|
Dassault Announces Enhancements to DELMIA V5
Dassault Systemes, a world leader in 3D and Product Lifecycle Management (PLM), announces that Version 5 Release 17 of its PLM software includes numerous enhancements to the DELMIA V5 Robotics program. |
|
|
Sun Expands System Packs Offering with 15 New Servers
Sun Microsystems, Inc., the creator of the Solaris Operating System (OS), has added 15 new systems to its Sun System Performance Packs offerings, including its x64 (x86, 64-bit) Sun Fire x4500 and X4600 servers and Sun Blade 8000 and 8000 P modular systems. |
|
|
Visualizing the Effects of Manufacturing Variation
Icona Solutions, developers of aesthetica, the unique CAE software product for interactively visualizing the impact of manufacturing variation on the aesthetic quality of product assemblies, has announced the availability of Version 2.3 of the software. |
|
|
Laser Design Announces New CATIA Importer for Geomagic
Laser Design Inc. announced the availability of the new CATIA importer for Geomagic Qualify 8. Geomagic Qualify 8 is the automated inspection software that speeds processes, provides in-depth analysis, and ensures repeatability that Laser Design integrates with its 3D laser scanning systems to provide a complete inspection solution. |
|
|
Schott Systeme Showcased CAD/CAM Solution
By special invitation of the 'Design and Engineering Forum' at Euromold 2006, CAD/CAM developer Schott Systeme GmbH showcased their latest range of 2D/3D design and machining tools to a packed group of designers and engineers alike. |
|
|
New NVIDIA Quadror Fx 3500m Graphics Solution
NVIDIA Corporation, the worldwide leader in graphics processors, announced the NVIDIA Quadro FX 3500M, a high-performing mobile workstation graphics solution for CAD, Digital Content Creation, and Scientific Visualization. |
|
|
Laser Design Announces Integration of Geomagic Studio V9
Laser Design, Inc. announced the immediate availability of Geomagic Studio Version 9, with enhanced 3D features, advanced color texture generation, and advanced tools for manually defining NURBS surfaces, completely integrated into its line of 3D laser scanning systems. |
|
|
MSC.Software Announces New Desktop-Based Simulation Solution
MSC.Software Corp., the global provider of enterprise simulation solutions and services, announced SimOffice, a cost-effective, desktop-based simulation solution that is designed for a wide range of manufacturers from small and mid-sized organizations to larger enterprises. |
|
|
Adobe Announces Availability of Acrobat 8 Software
Adobe Systems Incorporated announced the immediate availability of Adobe® Acrobat® 8 software amid an enthusiastic early reception from knowledge workers worldwide who for months have tested and provided feedback to help the company fine tune the product line. |
|
|
Geometric Releases NestLib v19 for Automated Nesting
Geometric Software Solutions, a leader in product lifecycle management (PLM) services and technologies, announces the release of NestLib v19. NestLib provides optimized, high speed and robust algorithms for fully automated true shape nesting. |
|
|
Dassault Systemes, IBM Reveals Expansion of Lotus Cars
Dassault Systemes S.A., a manufacturer of integrated software products, and International Business Machines Corp., an information technology company, revealed that long term CATIA user Lotus Cars has expanded its design tools to include a full range of PLM solutions for end-to-end product creation. |
|
|
MSC.Software Delivers High Performance Simulation
MSC.Software, the leading global provider of enterprise simulation solutions including simulation software and services, announced the company's MD Nastran can be deployed on Microsoft's Windows Compute Cluster Server 2003 to unleash the power of multidiscipline simulation on the desktops of the broader enterprise. |
|
|
Mentor Graphics Solves Key Industry Challenges
Mentor Graphics Corporation unveiled Capital® HarnessXC™, its next-generation harness design solution for electrical wire harness design and engineering in planes, trains and automobiles. |
|
|
Dassault Announces PowerFeature for Automotive Sector
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced a new Industry Solution Business Process Content (BPC), specifically designed for the automotive sector called PowerFeature. |
|
|
Dassault Introduces ABAQUS Student Edition Version 6.6
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, announces the availability of ABAQUS Student Edition Version 6.6. The new software offers engineering students many of the latest simulation capabilities for vibration analysis, material failure characterization, tire modeling, and visualization that were made available earlier this year in the commercial version of ABAQUS Version 6.6 software. |
|
|
Capvidia Releases FormatWorks 2007
Capvidia continues to provide the very best solution for SolidWorks users who need to translate CATIA data by keeping pace with new releases of CATIA V5 revisions. This new release supports all CATIA V5 revisions up to version 17. |
|
|
FTI Releases CAA Based Applications for CATIA V5R17
Forming Technologies Inc. (FTI) the industry’s leading developer of solutions for design, simulation, and costing of sheet metal components, announced the global availability of their entire suite of CAA based applications for Release 17 of CATIA V5. |
|
|
Dassault Releases CATIA PLM Express
Dassault Systèmes, a world leader in 3D and Product Lifecycle Management (PLM) solutions announced CATIA PLM Express, a scalable solution which provides CATIA design excellence at an affordable price, for companies of all sizes. |
|
|
iKnowledge Releases iCHECK R4 for CATIA
iKnowledge Solutions, Inc. (iKS, formerly Cadpo) announces the availability of iCHECK R4 featuring several significant enhancements and new modules. iCHECK is the de facto standard product data quality tool used by CATIA customers in the Aerospace industry. |
|
|
ANSYS Software Offers 64-Bit Support
ANSYS, Inc., a global innovator of simulation software and technologies designed to optimize product development processes, announced that the upcoming releases of its multiphysics simulation software - ANSYS(R) 11.0 and FLUENT(R) 6.3 - will include support for Microsoft Windows Compute Cluster Server 2003. |
|
|
CD-adapco Announces STAR-CAD Series V4.10
CD-adapco announced the STAR-CAD Series V4.10, the latest version of the industry leading CAD and PLM -embedded simulation tools that enable engineers and designers to perform industrial strength Computational Fluid Dynamics (CFD) calculations from within the comfort of their preferred CAD environment. |
|
|
Lattice Technology Releases New XVL Studio U3D Option
Lattice Technology, Inc., developers of the ultra-compressed XVL 3D format and industry leading 3D Publishing applications announced the availability of the XVL Studio Option for U3D. The new XVL Studio Option generates a U3D file and is available with the new XVL Studio version 6.1. |
|
|
Dassault Releases Enhanced PLM Portfolio
DASSAULT Systèmes, represented by Concentric, has released Version 5 Release 17 (V5R17) of its Product Lifecycle Management (PLM) portfolio, comprised of CATIA for collaborative product development, ENOVIA VPLM and ENOVIA SmarTeam for collaborative lifecycle management. |
|
|
MSC.Software Announces SimXpert
MSC.Software, the leading global provider of enterprise simulation solutions including simulation software and services, announced that the company's revolutionary SimXpert solution is now available to organizations participating in MSC.Software's Empower Program. |
|
|
Dassault Systèmes and IBM Announce Version 5 Release 17
Dassault Systèmes and IBM announced the release of Version 5 Release 17 (V5R17) of their Product Lifecycle Management (PLM) portfolio, comprised of CATIA for collaborative product development, ENOVIA VPLM and ENOVIA SmarTeam for collaborative lifecycle management. |
|
|
Contex Announces NEW Family of 36
Contex, the leader in wide-format imaging technologies, announced at their Annual Distributors Conference three NEW scanners with up to 36" image scanning capability—the COUGAR G600, CHAMELEON G600 and the HAWK-EYE G36 family of Color Scanners. |
|
|
New NVIDIA NVSG Scene Graph Software Drives Next-Generation
NVIDIA Corporation, the worldwide leader in programmable graphics processor technologies, released the latest version of its NVIDIA Scene Graph Software Development Kit (NVSG SDK), allowing developers to optimize applications and exploit the latest professional graphics processing hardware. |
|
|
New Océ PRISMA Software Maximizes Functionality
Océ, a global leader in digital document management and delivery solutions, announces new releases of Océ PRISMATM workflow software – Océ TrueProof® 2.10 and Océ PRISMAproductionTM 3.10 – to support expanded Océ Job Appropriate ColorTM solutions. |
|
|
New Handheld Z Corp. 3D Scanner
Z Corporation, maker of the world’s fastest and only multicolor 3D printers, unveiled the first handheld, self-positioning 3D scanner on the market that can digitize 3D surfaces in real time. |
|
|
NEW Contex G600 42
Contex, the leader in wide-format imaging technologies, announced at their Annual Distributors Conference the largest product launch in the history of Contex with the newest introduction to its comprehensive family of scanners—the G600 42" family of Color and Monochrome Scanners. |
|
|
CD-Adapco Launches STAR-Tutor
CD-adapco, the world-leading provider of full-spectrum CFD solutions announces the launch of STAR-Tutor: the CD-adapco on-line tutoring service. |
|
|
AscendBridge Introduces the First CATIA V5 Curriculum
AscendBridge Solutions Inc. launches a CATIA V5 Training Curriculum for the Mold Tooling Industry. This follows their recent announcement of the Intelligent Template Process Solution for the Mold Tooling Market. |
|
|
Announcing the Contex TOUCAN G25 Color Scanner
Contex, the leader in wide-format imaging technologies, announced at its annual Distributors Conference, the newest introduction to its comprehensive family of scanners—the TOUCAN G25 Color Scanner. |
|
|
New Nvidia Gelator 2.1 Beta Software
NVIDIA Corporation, the worldwide leader in programmable graphics processor technologies, has unveiled a new beta program for the Company's Gelato 2.1 final-frame rendering software. |
|
|
Mastercam Supports Mori Seiki Machines
CNC Software Inc., developer of Mastercam CAD/CAM software, in cooperation with Mori Seiki, is proud to announce a post processor for Mori Seiki’s new line of NT Multi-tasking machines. |
|
|
Océ Imagistics Introduces a New Series of MFPs
Océ Imagistics Inc. has introduced the Océ Imagistics im5530/im6030 and the im7230/im8530 series of MFPs. With speeds ranging from 55ppm to 85ppm, the four modular designs offer highly developed functionalities each in a single, smart and easy to use system. |
|
|
MSC Announces the Next Enterprise Simulation Platform
MSC.Software Corp. announced the introduction of SimEnterprise, an enterprise simulation development platform that enables computer-aided-engineering (CAE) designers, analysts, managers and the supply chain to interact throughout the design process. |
|
|
CFdesign Academic Instruction Program
Blue Ridge Numerics has announced the immediate availability of a special program designed to provide engineering students and faculty with affordable access to CFdesign for effective, hands-on instruction of fluid flow and heat transfer topics within existing MCAD-centric courses. |
|
|
LMS Releases Revision 6 of LMS Virtual.Lab
LMS, the engineering innovation company, announced the release of LMS Virtual.Lab Rev 6. This new release introduces an advanced and unified modeling environment, integrating all the required model creation and simulation tools to perform accurate system-level performance analyses. |
|
|
Toolpath Editing Added to FeatureCAM
Toolpath editing, a new function of FeatureCAM Version 2007, will be demonstrated at IMTS in Delcam’s Booth from September 6th to September 13th in Chicago, Illinois, USA. |
|
|
CAD/CAM 5-Axis Software Upgraded
Vero International Software majored on its latest product introductions at MACH 2006, giving many visitors their first opportunity to see the new and upgraded features to its VISI-Series CAD/CAM software. |
|
|
Cyco Software Releases Cyco AutoManager Meridian 2006
Cyco Software announced that it has released its new generation of Cyco AutoManager Meridian. This new update of Cyco AutoManager Meridian helps organizations to share their technical information across the enterprise. |
|
|
Contex Announces JPEG 2000 Compatibility
Contex Scanning Technology, the global manufacturing leader in wide-format document technologies, announces compatibility with the newest version of the JPEG format, JPEG 2000. |
|
|
PNY Technologies Provides New Scalable GPU
PNY Technologies Inc. announces a new family of ultra high-end graphic boards designed to handle massive datasets and specialized needs for the Visualization & Simulation. |
|
|
Dimension Unveils Large-Format 3D Printers
The Dimension 3D Printing Group, a business unit of Stratasys, Inc., introduced the Dimension 1200 Series; the industry’s first large-format 3D printers priced under $30,000. |
|
|
PARTsolutions Presents ASME B18
PARTsolutions® LLC, demonstrated the new ASME® B18 Digital Fastener Library at the National Design Engineering Show in Chicago. |
|
|
VISTAGY and Renault F1 Team
Engineers purchase FiberSIM® software to explore designs and simulate manufacture of reliable parts for the Renault F1 Team racecar. |
|
|
3D-Tool: New Version 7.5
Following the success of the greatly enhanced version 7.0, 3D-Tool now announces the release of version 7.5 of its 3D and 2D CAD viewer. |
|
|
STAR-CAT5 V4.02
STAR-CAT5 has been created specifically to enable Design and Project engineers to undertake basic flow simulation. |
|
| | |
